Compression Molded Tires Assignment Example | Topics and Well Written Essays - 1500 words

Compression Molded Tires - Assignment Example As the paper declares there are many parameters considered in the design of tires to consider them as high quality. Tires are designed with tread, beads and sidewalls. Treads are the patterned and molded surfaces that come in contact with the road surface. The body and sidewalls gives the shape of the tire and the rubber covered beads embedded with metals and wires holds the wheel tires. The tread depth is the parameter that shows the wear and tear of the tire. It can be measured through the difference of the top of the rubber tread with the bottom of the deepest grooves of the tire. The tread wear percentage is calculated for the remaining usability of the entire tire. According to the report findings the maximum load for the tire is another important parameter that reveals the capacity of every tire to carry weight. The load of the tire is related to the overall size and diameter of the tire. Tires with higher loads are considered to have stronger internal construction. Another parameter considered in manufacturing tires is the inflation pressure. Every tire has an allowable recommended inflation pressure that it can contain which is measured in cold conditions. Tires are marked with their allowable inflation pressure for the general safe operation for tires with specific load ratings. The speed rating of a tire is also an important factor to consider. It is basically the maximum allowable speed that the tire is designed.